Bituminous waterproofing membranes

IKOnic smooth 4 T/F 10 m

Waterproofing membrane composed of plastomer (APP) bitumen and a polyester-glass combination inlay. The upper surface is finished with talc and the lower surface is protected by a thermofusible film. This top layer can be applied in a multi-layer system.
Installation: fully torched-on, mechanically fastened (If membrane installed as first layer) or loosely laid and ballasted.

Type APP
Thickness mm 4,00
Weight 4,70 kg./m²
Inlay polyester-glass combination
Upper surface finish talc/sand
Lower surface finish thermofusible film
Colour*
Longitudinal length10,00 m.
Longitudinal width1,00 m.
Rolls/pallet20

Bituminous waterproofing membranes brochure

Bituminous waterproofing membranes brochure