Bituminous waterproofing membranes
  • mark

IKO Powerflex 4000 AR/F 10 m

Waterproofing membrane composed of еlastomer (SBS) bitumen and a polyester-glass combination inlay. The upper surface is finished with light grey crushed slate and the lower surface is protected by a thermofusible film. This top layer can be applied in a multi-layer system.
Installation: fully torched-on or loosely laid and ballasted.

Type SBS
Thickness mm 3,50 # 4,50
Weight 4,00 kg./m²
Inlay polyester-glass combination
Upper surface finish min
Lower surface finish thermofusible film
Colourgray
Longitudinal length10,00 m.
Longitudinal width1,00 m.
Rolls/pallet20

Bituminous waterproofing membranes brochure

Bituminous waterproofing membranes brochure