Bituminous waterproofing membranes

IKO Powerflex 4500 AR/F 10 m

Waterproofing membrane composed of еlastomer (SBS) bitumen and a polyester-glass combination inlay. The upper surface is finished with light grey crushed slate and the lower surface is protected by a thermofusible film. This top layer can be applied in a multi-layer system.
Installation: fully torched-on or loosely laid and ballasted.

Type SBS
Thickness mm 3,00 # 4,00
Weight 4,50 kg./m²
Inlay polyester-glass combination
Upper surface finish min
Lower surface finish thermofusible film
Colourgray
Longitudinal length10,00 m.
Longitudinal width1,00 m.
Rolls/pallet20

Bituminous waterproofing membranes brochure

Bituminous waterproofing membranes brochure